Repace that old rusty or damaged top plate with this new reproduction part made from mild steel and primed in self etching primer ready to paint any color you want. Pantent Pend.

PN 251                                                                     REG PRICE $179.00

                                                                                                S/H $39.95

Here is the best of both worlds, a new top plate with the New Top Plate Extenions included all for one low price. You can replace that rusty /damaged top plate and customize all in one step.  Plus you save a little cash by buying both at the same time. Patent Pend.

PN 252                                                                    REGULAR PRICE $248.00

                                                                                             S/H           $ 39.95

Tired of that nasty looking top plate everytime you open your hood. Tried several times to re-paint it only to make the pitting show up even more. If your top plate is still doing it's job holding up the nose cover than all you need is a simple way to dress it up. Here is the answer this cover plate mounts directly over your old top plate and will make it look new again. Just about 5 min. you can trasform that aera under your hood with verry little work. Just four bolts and a couple of push pins and your done. This product comes to you in self etching primer ready to paint any color you want. This works well with the top plate extentions as well. Looking for a replacement that has a little more pazaz look a little farther down this page. Patent Pend.            

 PN 253                                                                             REG PRICE $69.00

                                                                                            S/H           $ 24.95

These are Custom Monte Carlo SS Extenion plates that fasten to the top plate cover and cover up the nasty headlight wirring / bumper shock / ect. I really cleans up the appearance fo the front group and at the same time give's suport to the nose cover. No more gap between the top plate and the fender. Looking for these end plates but don't need the advatage of the added nose suport look a little farther down the page. Patent Pend.

PN 022                                                                                    PRICE  $79.00

                                                                                                  S/H     $17.50

These are the impossible to find Monte Carlo SS mounting brkts that align the front nose cover to the front fenders and top plate. These are new manufactured parts.Patent Pend.

PN 255                                                                                      Price  $69.00

                                                                                                   S/H   $17.50

Here is the answer to the guys that want to run electric fans and lose the shroud. It's light weight and yet plenty strong. It's made of 22 gs mild steel and will host most every make of radiator and fan comb. It comes to you with a coat of self etching primer ready to be painted any custom color you want. Patent Pend.

PN 256                                                                                       Price  $69.00

                                                                                                     S/H   $24.95

This is aa product thats not for everyone but I feel that all that show there Monte Carlo hate the big gapeing hole on each iner front fenders. You can't paint in their and make it look good so here is the solution . One mounts behind the Battery nad the other mounts over the horn aera. Will require re-mounting the horns and re-routeing the wires but when done it shure makes it look alot better. Patent Pend.

PN 257                                                                                           Price $69.00

                                                                                                        S/H  $15.00

These are the brkts that mount the SS fiberglass headlight houings to the fender.Patent Pend

PN 258                                                                                        Price  $49.00

                                                                                                      S/H  $12.50

These are the near impossible to find rear bumper mounting brkts. Now avialble new.Patent Pend.

PN 259                                                                                       Price $39.95

                                                                                                    S/H   $ 9.95

Got a nasty looking radiator top plate but it's still doing it's job. You have tried everything you can to clean it up but still looks nasty. Here is the solution !

This top plate bolts directly over the top of your orignal top plate covering up all that nasty pitting. Mounting is quick and simple and with the bead rolling you now have a custom look. This part is made from strong 22ga steel primed with self etching primer ready to be painted any color you chose. Patent Pending

PN 260                                                                                       Price    $79.00

                                                                                                  S/H      $ 24.95

NEW ITEM ! CUSTOM BEAD ROLLED TOP PLATE EXTENTIONS WITH QUICK REMOVAL OPTION . IF YOU DON'T NEED THE ADDED NOSE COVER SUPORT THAT THE ORIGNAL STYLE PROVIDES HERE IS A OPTION SAME GREAT PRODUCT JUST A HOLE LOT EASIER TO INSTALL AND REMOVE. 1 BOLT AND THIS ITEM IS INSTALLED OR REMOVED. PATENT PENDING.

PN 261                                                                                    PRICE $ 69.00

                                                                                                 S/H     $ 17.50

Here is a combo that will turn heads for sure. This ultra easy to install combo comes to you primed with self etching primer ready to paint any color you desire. This is used when your top plate is still doing it's job but looks nasty no mater what you do. Easy to install just 4 bolts and 6 push pins and you will be looking good.

PN 262                                                                                    PRICE $158.00

                                                                                                      S/H $24.95

Same great product as seen above but if you are looking for a version that's easy to install and remove this is the ticket!  This design does not help suport the nose like the SSFRT203 but looks just as good and is a whole lot easier to install and remove. Patent Pending.

PN 263                                                                                     Price  $59.00

                                                                                                  S/H      $17.50

81-88 MONTE CARLO SS / MONTE CARLO LS / CL ALSO EL CAMINO & MALIBU ELECTRIC FAN RADIATOR TOP SUPPORT . CUSTOM BEAD ROLLED ( EMBLEMS NOT INCLUDED) EMBLEMS CAN BE PURCHACED SEPERATLY. PATENT PENDING.

PN 264                                                                                     PRICE  $79.00

                                                                                                  S/H      $24.95

Here is the answer to that nasty looking top plate and add a customized look at the same time. this part installs in a snap and also helps if your nose cover is saging in the center. This works well with PN SSFRT203A

Patent Pending.

PN 265                                                                                      Price  $79.00

                                                                                                      S/H  $24.95